PG/M
Cable Glands & Hose Fittings
PG and metric cable glands, metal hose fittings and quick hose connectors.
20 part numbers 2 Technical Data 1 Catalog page
Part Number List
Cable glands
| Part No. | Termination / Type | Gender | Ratings | |
|---|---|---|---|---|
| D21-11 | Cable gland / conduit fitting D21 | ||
| D21-13.5 | Cable gland / conduit fitting D21 | ||
| D21-16 | Cable gland / conduit fitting D21 | ||
| D21-21 | Cable gland / conduit fitting D21 | ||
| D21-29 | Cable gland / conduit fitting D21 | ||
| D21-36 | Cable gland / conduit fitting D21 | ||
| D21-16M | Cable gland / conduit fitting D21 | ||
| D21-20M | Cable gland / conduit fitting D21 | ||
| D21-24M | Cable gland / conduit fitting D21 | ||
| D21-27M | Cable gland / conduit fitting D21 | ||
| D21-30M | Cable gland / conduit fitting D21 | ||
| D21-33M | Cable gland / conduit fitting D21 | ||
| D21-36M | Cable gland / conduit fitting D21 | ||
| D21-42M | Cable gland / conduit fitting D21 | ||
 | G11 | Metal hose fitting (nickel-plated zinc alloy) | ||
| G13.5 | Metal hose fitting (nickel-plated zinc alloy) | ||
| G16 | Metal hose fitting (nickel-plated zinc alloy) | ||
| G21 | Metal hose fitting (nickel-plated zinc alloy) | ||
| G29 | Metal hose fitting (nickel-plated zinc alloy) | ||
| G36 | Metal hose fitting (nickel-plated zinc alloy) |
Technical Data
Cable glands
| Nylon Material | 尼龙塑料 / Nylon plastic |
|---|---|
| Nylon Seal | NBR (NBR) |
| Nylon Protection | IP67-5巴压力(旋紧部位并使用O-密封圈) |
| Nylon Ambient temperature | 静态-40℃至100℃，短时至120℃；动态-20℃至80℃，短时至100℃ |
| Nylon Colours | 灰色 / 黑色 / 其它颜色请询问 |
| Brass Material | Nickel-plated brass / Brass plated nickel |
| Brass Seal | 尼龙66和丁晴橡胶 |
| Brass Protection | IP68(在使用O型圈的情况下) |
| Brass Temperature range | -40℃...+100℃，短时间可以达到120℃ |
Quick hose connector
| Material | PA尼龙 / PA nylon |
|---|---|
| Thread | 公制螺纹、德制螺纹 |
| Operating temperature | -40℃~+110℃ |
| Colour | 黑色、其他颜色可以定做 |
| Features | 内锁扣和本体特殊设计，装卸只需拔插无需工具 |
| Usage | 软管接头是软管的配套产品，可接入设备箱体上，也可以根据选用螺纹接入进出品为内螺纹的电动设备上，只需软软插入接口即可 |
Catalog page
Dimension drawings, pin layout and panel cut-out are shown on the catalog page below. CAD / 3D files are available on request.
Individual datasheets and 2D/3D models are being prepared — contact us to receive them now.